Specifications
TANK
Impact resistant polyethylene tanks with UV-stabilised finish.
Calibrated sight gauge, flip-open filling lid with large basket strainer, separate chemical pre-mixer and 1¼” drain valve.
Quick fill system and suction probe fitted standard.
Models available:
»» 3000 litre main tank with separate 90 litre flush tank
»» 2000 litre main tank with separate 130 litre flush tank
»» 1500 litre main tank with separate 120 litre flush tank Separate 15 litre fresh water tank on all models.
FANS
Four 420mm or 500mm individual axial-type fan heads. Hydraulic drive with four fans plumbed hydraulically in series using oil supply from the tractor, controlled via a soft-start and oil control plus distribution block to the fans. Each fan has a rotomolded aerodynamic cowl for excellent air flow, impact resistance and light weight. Fully enclosed bearings and internal spray ring with swivel nozzle bodies and ALBUZ nozzles. 5-blade fan on both models is specifically designed and tested for maximum high-torque air delivery.
Leaf guards are now fitted to the two lower fans behind the sprayer.
Manually adjustable fan speed control is standard. Electric control is optional with suitable controller.
PUMP
AR oil-backed triple-diaphragm type poly pump with chemical resistant diaphragms. AR140LFP (140 L/min), 0–15 bar.
DRIVE
Tractor PTO driveshaft to pump. Driveshaft supplied.
CONTROLS
ECM 4-tap control with pressure adjustment and gauge.
AGITATION
»» 3000, 2000 litre – twin Supa-flo agitators
»» 1500 litre – single Supa-flo agitator
FILTRATION
Lid strainer, large suction filter, nozzle filters.
NOZZLES
ALBUZ 60º and 80º ceramic hollow cone nozzles fitted as standard (brown and yellow).
»» 500mm fan – fitted with eight individual fully adjustable single-swivel nozzle assemblies. A main shut-off valve for each spray head is fitted
»» 420mm fan – fitted with dual spray rings. 5 x nozzles per spray ring (10 x nozzles in total). A manual shut off valve is fitted to each spray ring to for low, medium or higher volume rates.
CHASSIS
Hot-dipped galvanised, full-length with jockey wheel, fixed axle comes with 6-stud heavy duty wheel hubs and step. Self steer drawbar is standard.
WHEELS
»» 3000 litre – steel rims, 400 x 15.5” flotation multi-rib tyres
»»2000, 1500 litre – steel rims, 11.5/80 x 15.3” tubeless tyres
»» Standard unit comes with single axle
TRACTOR OIL SUPPLY
»» 4 x QM500 fans – system requires 25 L/min oil flow at 2,700 psi, at the tractor remotes, for full performance of 2,250 fan RPM
»» 4 x QM420 fans – system requires 20 L/min oil flow at 2,100 psi, at the tractor remotes, for full performance of 2,500 fan RPM
DIMENSIONS
»» 3000 litre – 4.0m L x 1.65m W x 2.85m H (mast height)
»» 2000 litre – 3.7m L x 1.45m W x 2.7m H (mast height)
»» 1500 litre – 3.5m L x 1.45m W x 2.6m H (mast height)
Note – dimensions may vary where different options are applied.
Options
SPRAY PUMP
HT-AR160LFP AR160LFP pump in lieu of AR140LFP pump
SPRAY CONTROLS
HT-ARAG2 Electric left/right proportional shut-off with switchbox and pressure adjustment
HT-BRAVO180 Bravo 180 auto-rate controller, 2-section motor valves
HT-HV4000 HV4000 auto-rate controller, 2-section motor valves
FAN SYSTEM
HP-223C-2 Electric fan speed control from cab – MUST have HV4000 controller fitted for this option
HT-HVRPM1 Single fan rpm sensor for HV4000, monitors one fan only
HT-NOZ500 Individual nozzle shut-offs (per head) for QM500 fans
AXLE/WHEELS/SUSPENSION
HT-HP202G 400 x 15.5” flotation tyres in lieu of standard tyre (2000 litre)
HT-AXADJ Adjustable height and width axle (1500 and 2000 litre only)
HT-SUS Single wheel suspension for 1500 & 2000 litre only (non-adjustable axle)
HT-SUS3 Single wheel suspension for 3000 litre only (non-adjustable axle)
HT-BP400DB Tandem axle to suit 2000 litre, including mud flaps
HT-BP400J Tandem axle to suit 3000 litre, including mud flaps
