Specifications
TANK
Impact resistant polyethylene tanks with UV-stabilised finish.
Calibrated sight gauge, flip-open filling lid with large basket strainer, separate chemical pre-mixer and 1¼” drain valve. Quick fill system and chemical suction probe standard on all models.
Models available:
»» 4000 litre main tank, separate 80 litre flushing tank
»» 3000 litre main tank, separate 90 litre flushing tank
»» 2000 litre main tank, separate 130 litre flushing tank
»» 1500 litre main tank, separate 120 litre flushing tank
Separate 15 litre fresh water tank on all models.
FANS
»» QM500 (500mm) – eight QM500 axial-type fan heads, hydraulically driven simultaneously from tractor remotes. Tough, rotomolded cowl for impact resistance. Leaf guards are now fitted to the two lower fans behind the sprayer on the QM500 fans. Additional leaf guards for outer fans are optional.
TRACTOR OIL SUPPLY AND HYDRAULIC CONTROL
»» Eight QM500 fans – the system requires 50 L/min oil flow at 2,750 psi, at the tractor remotes, for full performance of 2,250 fan RPM
Hydraulic distribution block on sprayer includes soft-start system, factory-set pressure relief valve, anti-cavitation and check valve for safety.
½” pressure line and ¾” return line to plumb to tractor tank are supplied. As standard, 3 sets remotes are required: 2 sets for left/right boom fold, one set for fan oil supply. An optional electric/hydraulic diverter valve (HT-EDV) is available to reduce requirement for remotes to two. See factory fitted options.
Optional in-cab electric fan speed adjuster is available.
Note: Must have HV4000 controller for this option
AGITATION
Twin Supa-flo agitators.
PUMP
AR oil-backed diaphragm type poly pump with chemical resistant diaphragms, AR160LFP (160 L/min), 0–15 bar.
OIL COOLER
12 volt electric fan oil cooler to cool hydraulic oil.
DRIVE
»» PTO shaft (SH1AG/1200) for standard model
»» PTO shaft (SH4AG/1200) for Micro Power Pack model
CONTROLS
Standard ECM manual control left/right shut-offs and manual relief valve. Optional fully automatic spray rate controller and Arag motorised valves.
FILTRATION
Lid strainer, large suction filter, pressure filters.
NOZZLES
ALBUZ 60º and 80º ceramic hollow cone nozzles fitted as standard (brown and yellow).
»» 500mm fan – fitted with eight individual fully adjustable single swivel nozzle assemblies. A main shut-off valve for each spray head is fitted
CHASSIS
Single axle standard with suspension. Full length heavy-duty, galvanised chassis with single step and jockey stand/wheel. Self-steer drawbar standard on all models.
WHEELS
»» 4000, 3000 litre – steel rims 400 x 15.5” flotation tyres
»» 2000 and 1500 litre – steel rims, 11.5/80 x 15.3” tubeless tyres
OPTIONAL MICRO POWER PACK (INDEPENDENT OIL SUPPLY)
The new Micro Power Pack is a self contained, independent oil supply system to reduce reliance on tractor hydraulics. It is PTO driven, mounted on a self steer drawbar and linked to the sprayer. The Micro Power Pack features new technologies which create a smaller (20 litre oil capacity), lighter, quieter and cooler running unit, with automatic cut out if oil levels drop.
Suitable for 40 – 140 L/min oil flow, dependent on pump size. Match pump size to sprayer requirements.
»»QM500 fans – 36cc pump for max 58 L/min of oil flow. Requires one tractor remote to drive product pump from tractor hydraulics
»» Dual pump – Combines the standard 36cc pump with another 24cc pump which drives the product pump, eliminating the need for tractor oil supply for the product pump
OVER-ROW HYDRAULIC FOLD ARMS
Optional independent electro-hydraulic boom arm fold comes with electric diverter valve and in-cab switchbox.
(HT-EDV – see factory fitted options).
DIMENSIONS
»» 4000 litre – 4.3m L x 2.0m W x 3.05m H (mast height)
»» 3000 litre – 4.0m L x 1.65m W x 2.85m H (mast height)
»» 2000 litre – 3.7m L x 1.65m W x 2.7m H (mast height)
»» 1500 litre – 3.5m L x 1.65m W x 2.6m H (mast height)
Note – dimensions may vary where different options are applied.
Options
SPRAY CONTROLS
HT-ARAG2 Electric left/right proportional shut-off with switchbox and pressure adjustment
HT-BRAVO180 Bravo 180 auto-rate controller, 2-section motor valves
HT-HV4000 HV4000 auto-rate controller, 2-section motor valves
FAN SYSTEM
HP-223C-2 Electric fan speed control from cab – MUST have HV4000 controller fitted for this option
HT-HVRPM1 Single fan rpm sensor for HV4000, monitors one fan only
HT-BRAVORPM1 Single fan speed sensor for Bravo 180S, monitors one fan only.
HT-NOZ500 Individual nozzle shut-offs (per head) for QM500 fans
HT-FG/2 Outer fan guard/leaf shield fitted to outer row fans, total for two extra leaf shields
AXLES/WHEELS/SUSPENSION
HT-HP202G 400 x 15.5” flotation tyres in lieu of standard tyre (2000 litre, single axle)
HT-BP400W Tandem axle to suit 1500 litre
HT-BP400D2 Tandem axle to suit 2000 litre, including mud flaps
HT-BP400J2 Tandem axle to suit 3000 litre, including mud flaps
HT-BP400AD2 Tandem axle to suit 4000 litre, including mud flaps
TOWER ASSEMBLY
HT-EDV Electric diverter valve for left/right fold using one set of tractor remotes
HT-ORADJ Hydraulically adjustable left/right terracing kit with electric/hydraulic control
HT-ORORA Hydraulic outer-row width adjustment (500mm) with electric/hydraulic control
HT-IRORA3 Hydraulic inner-row width adjustment (inner arms linked)
MISC If any two of the above hydraulic options are chosen (i.e. outer row adjustment plus terracing), a saving is available due to only one set of Cetop valves and one switchbox being required
HT-HT400 Tower height extension of 400mm over standard height
FULLY ENCLOSED POWER PACK
HT-MICROPACKSINGLE Micro Power Pack with single pump to run Quantum Mist fans using on-board oil system
HT-MICROPACKDUAL Micro Power Pack with dual pumps to run Quantum Mist fans and chemical product pump using onboard oil system
HT-HVRPMSENSOR Rpm sensor for spray pump on powerpack model (must have HV4000)