Specifications

TANK

2000 litre main tank with separate 120 litre flush tank. 4 litre hand-wash tank.
Impact resistant polyethylene tank with UV-stabilised finish.
Calibrated sight gauge on front and side, flip-open filling lid with large basket strainer, separate chemical Chem induction probe and 1¼” drain valve. Deep sump design for total draining and liquid pick-up in sloping ground.

FAN OPTIONS

»» Kiwiliner - 820mm DSV Front-entry fan - stainless steel shroud and rear plate, downstream adjustable straightening vanes, NEW design glass-reinforced nylon polymer blades with adjustable pitch, 14 roll-over bodies per side, 2-speed oil-bath gearbox, centrifugal fan clutch. Optional second spray ring

PUMPS

ARBHS170 pump with brass heads and manifolds, oil-backed diaphragm type with chemical resistant diaphragms. 0-50 bar rated, 161 L/min (open-flow, zero pressure).
Optional ARBHS200 pump with brass heads and manifolds, oil-backed diaphragm type with chemical resistant diaphragms. 0-50 bar rated, 194 L/min (open-flow, zero pressure).

DRIVE (SH5AG)

Heavy duty PTO driveshaft comes with safety covers and quick release pins. Optional CV shaft.

CONTROLS

Remote mounted two-tap brass block controller with individual left/right shut-off, pressure adjustment and glycerine-filled gauge. Pressure and bypass regulator mounted on the pump.
Optional electric and auto rate controllers – see options

AGITATION

Supa-flo agitator and full bypass while filling with PRV in bypass mode

FILTRATION

Lid strainer, large suction filter. Optional pressure filters.

NOZZLES

Brass swing-over nozzle bodies, automatic shut-off type when in the half-turn position.
All units supplied with one set of ceramic hollow cone ALBUZ nozzles. Discs and cores optional.

CHASSIS

»»Hot-dipped galvanised, full-length with adjustable drawbar and single step, 6-stud wheel hubs, bumper bar comes with leaf guard. Side bumpers fitted standard for headland protection. Fixed axle standard; optional adjustable height and width axle.
»» Jockey wheel supplied on all models

WHEELS

»» Kiwiliner 2000 – steel rims, 27x9.5-15”

POWER REQUIRED - FAN ONLY

920mm DSV fan – minimum 37kW (50 hp) at PTO
20mm FE fan – minimum 34kW (45 hp) at PTO

DIMENSIONS

4.1m L (incl. drawbar) x 1.6m W x 1.38m H
Weight – approx 640kg Ca. Dry

Options

SPRAY PUMP

HT-ARBHS200 200 L/min brass pump in lieu of ARBHS170 brass pump

DRIVE AND HITCH

HT-CV Wide angle constant velocity PTO shaft 

SPRAY CONTROL

HT-IS4021 Electric left/right 2-section on/off solenoids, electric pressure adjustment with integrated pressure filter and master switch with dump solenoid
HT-VISIO Visio spray monitor fitted - comes with flowmeter, sensor and cable to cab 
HT-HV2400-SOL2 Croplands auto-rate controller, 2-section using on/off solenoid valves 
HT-HV2400-SOL4 Croplands auto-rate controller, 4-section using on/off solenoid valves. Note - HT-SPLIT4SEC or HT-C218 must be added for this option 

CHEMICAL HANDLING

HT-RINSE Spray basket rinse kit 
HT-KLC KLC-72 nozzle with manual dual feed taps 

FAN ACCESSORIES

B146.504.1070 In-line brass pressure filters (pair) {add extra set for twin rings on Kiwiliner} 
HT-OSW Organic swing-over nozzle bodies (no non-drip) 
HT-SPLIT4SEC 4 section spray ring, comes with swing-over nozzle bodies and one set of Albuz ATR's supplied. For auto-rate or electric four section control, please check before ordering as extra cost is involved
HT-C218 2nd spray ring for Kiwiliner model only, comes with swing-over nozzle bodies and one set of Albuz ATR's supplied.
For auto-rate four section control see option HT-HV2400-SOL4 above
B84.617.22 Triple roll-over nozzle bodies in lieu of double roll-over bodies, includes one set ATR nozzles 

WHEEL OPTIONS

HT-HP202G 400 x 15.5 flotation tyres in lieu of standard tyre (Avoliner only) 

NOZZLES

2nd SET OF NOZZLES (text on order)
Albuz pink Ceramic disc & cores as second set of nozzles (one set of Albuz ATR conejets supplied with the sprayer) {For twin spray ring, allow a 2nd set}
A.I. nozzles 1 set (text on order) One set of Air Induction nozzles for HiCane application 
HT-TG Top Gun assembly for Avoliner only, 2 x B64.610.69 long-throw adjustable nozzles per side. 1.5 nozzles standard.
Includes protective frame. For double-side spraying of tall tress to 10 metres