Overview
FOR TREES TO 10 METRES HIGH USING THE WORLD-LEADING 1060DSV FAN
FEATURES AND OPTIONS
»» 3000 and 4000 litre tank sizes available
»» 1060mm DSV fan with down-stream straightening vanes for high-volume air delivery with reduced horsepower requirement – setting the industry standard in large tree spray coverage
»» Stainless steel fan shroud – rugged and totally corrosion resistant
»» 2-speed gearbox for fan to allow for varying tree sizes
»» Brass pump, options from 170 to 200 L/min
»» 15 brass roll-over nozzle bodies per side to give excellent coverage throughout the tree canopy
»» A choice of controller options from manual to fully automatic spray rate control
»» Fully hot-dipped galvanised chassis with rear bumper
FOR TREES TO 6 METRES HIGH USING THE WORLD-LEADING 920DSV FAN
FEATURES AND OPTIONS
»» 1500, 2000, 3000 and 4000 litre tank sizes available
»» 920mm DSV fan with down-stream straightening vanes for perfect air delivery and reduced horsepower requirement
»» Stainless steel fan shroud – rugged and totally corrosion resistant»» 2-speed gearbox for fan to allow for varying tree sizes
»» Brass pump, options from 170 to 200 L/min
»» 14 brass roll-over nozzle bodies per side to give excellent coverage throughout the tree canopy
»» A choice of controller options from manual to fully automatic spray rate control
»» Fully hot-dipped galvanised chassis with rear bumper
Specifications
TANK
Impact resistant polyethylene tanks with UV-stabilised finish. Calibrated sight gauge, flip-open filling lid with large basket strainer, separate chemical pre-mixer and 1¼” drain valve. Quick fill system and suction probe fitted standard. Models available:
»» 4000 litre main tank with separate 80 litre flush tank
»» 3000 litre main tank with separate 90 litre flush tank
»» 2000 litre main tank with separate 130 litre flush tank
»» 1500 litre main tank with separate 120 litre flush tank Separate 15 litre fresh water tank on 1500 and 2000 litre models.
FAN OPTIONS
»» 920mm DSV fan - stainless steel shroud, downstream adjustable straightening vanes, NEW design glassreinforced nylon polymer blades with adjustable pitch, 14 roll-over bodies per side on twin spray rings, 2-speed oil-bath gearbox, centrifugal fan clutch
»» 820mm DSV fan - stainless steel shroud, downstream adjustable straightening vanes, NEW design glassreinforced nylon polymer blades with adjustable pitch, 14 roll-over bodies per side on twin spray rings, 2-speed oil-bath gearbox, centrifugal fan clutch
»» 820mm Linear Tower – galvanised tower, 7 nozzles per side, 2-speed gearbox, adjustable pitch blades
»» 1060mm DSV fan – stainless steel shroud and fixed stainless straightening vanes, NEW design glass-reinforced nylon polymer blades with adjustable pitch, 15 roll-over bodies per side on twin spray rings, 2-speed oil-bath gearbox, centrifugal fan clutch. 1060 fan only available on 3000 and 4000 litre models
PUMP
»» 4000, 3000, 2000 litre – AR oil-backed diaphragm type with chemical resistant diaphragms, and corrosion resistant brass heads and manifold (ARBHS170)
»» 1500 litre – AR oil-backed diaphragm type with chemical resistant diaphragms, and corrosion resistant cast anodised body (ARBHA140)
DRIVE (SH5AG)
Heavy duty PTO driveshaft comes with safety covers and quick release pins. Optional CV shaft
CONTROLS
Remote mounted ARBMH50 controller with individual left/right shut-off, simultaneous shut-off, full bypass, pressure adjustment and glycerine-filled gauge. Optional electric and auto rate controllers
AGITATION
»» 4000, 3000, 2000 litre – twin Supa-flo agitators
»» 1500 litre – single Supa-flo agitator
FILTRATION
Lid strainer, large suction filter. Optional pressure filters
NOZZLES
Brass swing-over nozzle bodies, automatic shut-off type.
All units supplied with one set of ceramic hollow cone ALBUZ nozzles and one set of disc and core standard.
CHASSIS
»»Hot-dipped galvanised, full-length with adjustable
»»Drawbar and single step, 6-stud wheel hubs, bumper bar comes with leaf guard. Fixed axle standard; optional adjustable height and width axle.
»» Jockey wheel supplied on all models
WHEELS
»» 4000, 3000 litre – steel rims, 400 x 15.5” flotation tyres
»» 2000, 1500 litre – steel rims, 11.5/80 x 15.3”
POWER REQUIRED
»» 920mm DSV fan – minimum 37kW (50 hp) at PTO
»» 820mm DSV fan – minimum 34kW (45 hp) at PTO
»» 1060mm DSV fan – minimum 71kW (95 hp) at PTO
DIMENSIONS
»» 4000 litre – 4.3m L x 2.0m W x 1.9m H
»» 3000 litre – 4.0m L x 1.65m W x 1.65m H
»» 2000 litre – 3.7m L x 1.45m W x 1.55m H
»» 1500 litre – 3.5m L x 1.45m W x 1.45m H
Note – dimensions may vary where different options are applied
Options
SPRAY PUMP
HT-ARBHS200 200 L/min brass pump in lieu of ARBHS170 brass pump, add (note - not suitable for split manifolds)
DRIVE
HT-CV Wide angle constant velocity PTO shaft
HT-SDB1 Self-steer drawbar (must add HT-CV option) - 1500 & 2000 litre only
HT-SDB2 Self-steer drawbar (must add HT-CV option) - 3000 & 4000 litre only
SPRAY CONTROL
HT-IS4021 Electric left/right 2-section on/off with solenoids, electric pressure adjustment with integrated pressure filter and master switch with dump solenoid
HT-HV2400-BRAG2 Croplands auto-rate controller, 2-section using on/off solenoid valves
HT-BRAVO180/S Bravo 180S auto-rate controller, 2-section using on/off solenoid valves
HT-HV4000/S HV4000 auto-rate controller with 2-section using on/off solenoid valves
FAN ACCESSORIES
B146.504.1070 In-line brass pressure filters (pair)
HT-OSW Organic swing-over nozzle bodies (no non-drip)
HT-SPLIT4SEC 4 section spray ring, comes with swing-over nozzle bodies and one set discs and cores. For auto-rate or electric four section control, please check before ordering as extra cost is involved
WHEEL OPTIONS
HT-HP202G 400 x 15.5” flotation tyres in lieu of standard tyre
HT-AXADJ Adjustable height and width axle
HT-SUS Suspension for 1500 and 2000 litre Cropliner (non-adjustable axle)
HT-SUS4 Suspension for 3000 & 4000 litre Cropliner (non-adjustable axle)
HT-BP400D Tandem axle to suit 2000 litre Cropliner
HT-BP400J Tandem axle to suit 3000 litre Cropliner
HT-BP400AD Tandem axle to suit 4000 litre Cropliner
